The condition of the car tires with regards to the effectiveness of the use of the alias save fuel oil (FUEL)? Yes, that's the aspect that we often forget in addition to considering the distance traveled by car as well as the condition of the machine. Friction between car tyres and the road surface or engine performance that do not normally determine the barriers experienced by the engine performance while moving cars.
And the greater the obstacles experienced by the engine, the more wasteful FUEL consumption is also his. Then, it's good we rectify our behavior in driving and more ' friendly ' against the use of FUEL. Here are some steps to save fuel, according to autobild.
1. Spooring-Balancing
The corners on the wheels of a vehicle in accordance with the manufacturer's recommendations will ensure the tires are spinning with the resistance as low as possible. The process of spooring needs to be done 6 months once routinely, so does balancing so that vibration in the wheel getting minimised. Road conditions damaged increasingly shorten time interval spooring-balancing.
2. Wind pressure
Wind pressure holds an important role to minimize the friction of the wheels with the road surface. When the wind pressure is less, then the greater the tire barriers. Grip tires decreases if the surface is not perfectly flat tires. But don't also increase tire pressure is excessive, which interfere with the comfort and safety of motorists.
3. Brake Tool
anchoring the rate this vehicle should be regularly controlled, especially at the crack of the remnya, so that it cannot rub against the brake disc or with tromol. Need to watch out for corrosion in brake caliper brake forgot if oil changed every 20,000 km or once a year. Don't forget the caliper overhaul in every 50,000 km to avoid damage to the piston in the caliper.
The brake caliper piston already corrosion will cause a critical interface with discs or tromol, so that the piston does not want to return to its original position despite not step on the brake pedal. So the pace of the car the more severe and result in wasteful FUEL. Due to the worst, the brake shoes will more quickly depleted and eventually lead to rem blong.
4. Wheel Bearings and engine
The role of the main bearing is to reduce friction. One of the damage which occurred in the bearing can be detected with the emergence of a strange sound when the wheels are spinning. The sound of rattling any sound on the front-wheel drive car, when sharp turned the steering wheel while you step on the gas pedal.
While for the bearing on the machine that need to look out for is the tensioner, alternator and compressor air conditioning while for damage bearing waterpump is generally followed by a leak in the cooling system.
5. Load the Car
Limit the charge on cars in order to not overload during walking. The excess charge is clearly forcing the engine to work extra hard.
6. Fuel Quality
The non-subsidized fuel to make more optimal engine performance and FUEL consumption of the car will be more efficient. In addition, the cleanliness of the combustion chamber kept awake, because FUEL quality able to maintain perfect combustion of occurrence in the combustion chamber and minimize carbon pile.
7. Servicing the machine periodically
Replacement of lubricants on a regular basis will minimize the friction between the moving components, until performance can remain optimal. Cleaning of the air filter and spark plug also keep combustion process remains perfect.
8. Driving Behavior
Aggressive driving style is the final determinant of FUEL savings. Setting the rhythm while stepping on the accelerator and the gearshift in the 2000-3000 rpm the engine note. Take advantage of the engine brake when passing the street downhill or a reduction in speed in the streets that were empty. Modern engine FUEL flow will decide when the engine brake.
0 Response to "Engine performance and FUEL Savings Support Wheel"
Posting Komentar